Scorpios Omega Tactical

SOT CUSTOM AR15 BATTLEWORN CRIMSON SPARTAN 300 BLK 9" High Performance Pistol 6lbs 6oz. Low Mass Lightweight BCG. Precision Engineered 3.5lb. drop-in trigger designed to give you more customization options and improve your finger’s position on the trigger. Adjustable gas block and Stealth Recoil System. Custom Builds with Affordable Value and Specifications. We build SPEC AR's or take orders on custom builds using Best Quality, Durable, Safe to Use, Light Weight, Reliable and Affordable parts Made in the USA. E-Mail us at info@SOT.LLC or call to discuss your next build 480.656.5686  

Warranty

Scorpios Omega Tactical provides a limited warranty on all Custom Builds. We want you to be more than satisfied with your precision parts and our customer service. We will do our best to make your experience dealing with our company a positive one. We do not cover stripped or abused parts. Give us a call if you have any questions 480.656.5686.

PRE-ORDER ONLY ALLOW 1-5 WEEKS for COMPLETION.

FINAL RESULT MAY VARY FROM IMAGES DEPICTED AS EACH BUILD IS COMPLETED TO ORDER THEREFORE NO 2 CUSTOM BUILDS ARE EXACTLY THE SAME!

Lower Receiver 

• Billet 7075-T6 Ultralight
• Rare Breed Spartan Crimson RED Battleworn Finish
• Spike's Tactical Spartan-Gen2 features now include a threaded bolt catch pin, reduced weight and improved styling
• An oversized integral trigger guard
• A beveled magazine flare that helps you load as quickly and efficiently as possible
• Machined top to bottom from 7075-T6 aluminum, a peak-strength corrosion-resistant aluminum alloy
• Hard coat anodize finish per MIL-A-8625
• Full compatibility with all mil-spec internal parts
• Full compatibility with all other aftermarket mil-spec upper receivers
• Full compatibility with PMags, Hex mags and other standard capacity magazines
• Multi caliber mark
• Enhanced Bolt Catch
• Extended MAG Release
• Ultralight Takedown Pins
• Weight: 10.7 oz

Bolt Carrier Group - Low Mass Lightweight

• This is a HP or High Performance part. It will change how your rifle feels and shoots. Tuning may be required to make the gun properly run with this part. 
• Bolt Finish: Parkerized
• Bolt Material: 9310 Steel
• Carrier Finish:Salt Bated Black Nitride
• Gas Key: Staked from the side to increase longevity 
• Magnetic Particle Inspection: Yes

Stealth Recoil Sytem

• This is a HP or High Performance part. It will change how your rifle feels and shoots. Tuning may be required to make the gun properly run with this part. 
• SRS™ self-contained multi-stage drop-in buffer and spring
• The SRS™ is designed to keep the buffer spring from rubbing against the inner wall of the buffer tube
• Smooth, quiet operation 
• Reduces the felt recoil significantly

Trigger

• This is a HP or High Performance part. It will change how your rifle feels and shoots. Tuning may be required to make the gun properly run with this part. This can be done via the gas system or the buffer system.
• 3.5lb Skeleton Precision Trigger
• Ultra-crisp trigger with no feel of creep prior to hammer release
• The trigger has a glass-smooth break with no feel of grittiness
• Minimal lock time is designed into the assembly using controlled hammer weight and balance activated by a rocket wire hammer spring, assuring repeatable function with either commercial or military grade ammunition
• Trigger pull is factory pre-set and not user adjustable
• Positive trigger reset allows a quick follow up shot on target
• Hand-assembled, and hand tested
• Totally self-contained one-piece assembly
• Comes with Risa Armament Anti-Walk Pin Set
• Made from 8620 Alloy Steel and S7 Tool Steel with machined tolerances of +/– .001"
• Encased in an Aluminum box with an anodized coating for increased rigidity to withstand full-auto rate of fire 

Gas System - Black Rain Ordnance

• This is a HP or High Performance part. It will change how your rifle feels and shoots. Tuning may be required to make the gun properly run with this part.
• Direct Impingement
• .750 Low Profile Adjustable Gas Block
• Pistol length Stainless Steel Gas Tube 

Complete Upper Assembly

• US Made
• Billet 7075-T6 Ultralight GEN 2 Upper
• Custom Cerakote Crimson Red Battleworn Finish
• Total Weight Including Barrel Nut Is 8.5 oz!!
• Triangle / Diamond Skeletonized Cuts Throughout Handguard to Reduce Weight
• Internal Diameter: 1.47"
• Gen 2 Design
• AIR-LOK Series- New Compression Lock Down Design
• M-LOK Slots On 4 Sides of Handguard (Top,Bottom, Left & Right Sides)
• Rail System Slides Over Barrel Nut , And Is Compressed Down Against Receiver With 4 Screws
• 10″ Length
• T6 Aluminum
• Proprietary lightweight Barrel Nut Included
• Monolithic Picatinny Top Rail
• Tight Fit Up Against Receiver, Which Allows For A Monolithic Top Rail
• Heavy Duty

Ambidextrous Charging Handle - Radian Weapons

• This is a HP or High Performance part. It will change how your rifle feels and shoots. Tuning may be required to make the gun properly run with this part.
• Radian Raptor Spike's Tactical
• 7075-T6 Ultralight Aluminum Construction
• Ported Shaft
• Mil-Spec Type-III Hardcoat Anodized Finish
• Weight: 1.4oz
• Supressor Optimized

Barrel

• 300 BLACKOUT Suppressor Optimized
• 1:7 twist
• 9" long
• 41V50 SS
• Fluted barrel
• Black nitride finish
• M4 feed ramps on the extension
• 5/8x24 muzzle threading
• Button rifled
• Air gauged
• Stress relieved,
• .750 gas block 
• Carbine length

Muzzle Device

• Fluted twist
• Flash Hider
• 5/8 X 24 Thread Pitch
• BLACK

Magazine

• 300 Blackout 30 Round capacity
• Steel Reinforced
• Sturdy Impact resistance polymer with textured grip
• Anti-tilt super follower
• Heavy duty, non-memory, and non-corrosive stainless steel spring
• Designed, tooled, manufactured, and assembled in the USA
• Transculent Smoke
• Material able to cerakote

Pistol Brace - SB Tactical SBPDW 

• 3-postion adjustable
• Complete assembly, ready-to-install, including a proprietary buffer tube (does not include buffer/spring)
• Compatible with mil-spec bolt carrier groups and carbine buffers/springs
• QD attachment point at 6 o’clock position on housing
• US veteran designed and proudly made in the USA
• The end plate and castle nut are integral to the assembly
• SBPDW buffer tube/castle nut assembly is aluminum.
• Space between rods is 1.175”
• Depth of the tube is 6.920”

Pistol Grip -  FUTURE FORGED

• “VENGEANCE” VEKTOR 2 GRIP
• Carbon FIber
• Total Weight: 1.8 oz!
• Non-Slip, Durable Coating
• Lightweight
• Skeletonized Cut Out Design
• Ergonomic Finger Grooves For Comfort
• Very Durable